6x30 PCB Mount Fuse Holder 3AG Fuse Clip Nickel Plated Brass 6x32 6x30mm FS-600 Fuse Clip Holder
Product Description
| Item | 6x30 Fuse Clip PCB Mount |
| Rating | 10A 250V |
| Body material | brass |
| Plating material | nickel |
| Pin distance | 7mm |
The most used fuse clips for 6x30mm fuses
Electrical Characteristics:
Nominal Current/Voltage:10A 250V
Operating Power:1.6W
Contact Resistance:<5mΩ
lnsulation Resistance:>100mΩ
Dielectric Strength:>3000Vac/60sec.
Widely used in household appliances, electric power, telecommunications, machine tools, ships, textiles, printing, mining machinery, Mustic instruments, etc.
Drawing
KEY WORDS: FUSE HOLDER. PCB FUSE HOLDER, FUSE CLIP
6x30 glass fuses
6x30 ceramic fuses
In electronics and electrical engineering, a fuse is an electrical safety device that operates to provide overcurrent protection of an electrical circuit. Its essential component is a metal wire or strip that melts when too much current flows through it, thereby stopping or interrupting the current. It is a sacrificial device; once a fuse has operated it is an open circuit, and must be replaced or rewired, depending on its type.
Fuses have been used as essential safety devices from the early days of electrical engineering. Today there are thousands of different fuse designs which have specific current and voltage ratings, breaking capacity, and response times, depending on the application. The time and current operating characteristics of fuses are chosen to provide adequate protection without needless interruption. Wiring regulations usually define a maximum fuse current rating for particular circuits. Short circuits, overloading, mismatched loads, or device failure are the prime or some of the reasons for fuse operation. When a damaged live wire makes contact with a metal case that is connected to ground, a short circuit will form and the fuse will blow.
Standard Package:
2000pcs per bag, 50000pcs per carton
Shipping Term:
EXW, DDU, DDP, C&F, FOB
Shipping Methods:
International Express, By Air, By Sea
Selection of the Fuse and Holder Solution
The first step is to answer the following questions:
- Will the fuse need to accessible for replacement?
- How often will the fuse need to be replaced?
- Should the end customer of the appliance have access to change the fuse?
- Should the fuse only be accessible from outside the appliance?
- How much is available to spend on safety and reliability?
5.1.2. Requirements and characteristics
The most important standards for fuse-holders, which specify requirements, characteristics and testing methods are:
- IEC-publication 257 (1968) and Amendment no. 2 to this publication dated January 1989.
- UL-standard no. 512.
Q: Are you trading company or manufacturer ?
A: We are a fuse product factory.
Q: How long is your delivery time?
A: Generally it is 3 days if the goods are in stock, 5-10 days if the goods not in stock, according to the quantity.
Q: Do you provide samples ? is it free or extra ?
A: Yes, we could offer the sample for free charge but do not pay the cost of freight.
Q: What is your terms of payment ?
Product Tags:
|
|
3AG 6x30mm Clip PCB Mount Fuse Holder 250V Nickel Plated Brass Images
|
